3D Spiral Crochet Flower With Three Pointed Petals

3D Spiral Crochet Flower With Three Pointed Petals

This dramatic 3D crochet flower combines a raised spiral rosette in the center with three large pointed lace petals behind it. The center is made from nine curled crochet petals arranged in a pinwheel, while the outer layer creates the large triangular flower shape.

Worked in a bright sunflower yellow, the finished flower looks beautiful as a bouquet flower, bag decoration, wall hanging, gift topper, or statement appliqué.

The flower is worked in layers from the same central ring, so there are no separate petals to sew together.


Finished Size

Using light #3 cotton yarn and a 2.5 mm hook:

Flower width: approximately 5½–6 inches / 14–15 cm

Raised center: approximately 2¾–3 inches / 7–7.5 cm across

Each large outer petal: approximately 2¾–3 inches / 7–7.5 cm long

The finished size may vary slightly depending on yarn and tension.


Materials

  • Light #3 / DK cotton or mercerized cotton yarn
  • Sunflower yellow or golden yellow
  • 2.5 mm crochet hook
  • Yarn needle
  • Scissors
  • Stitch markers, optional

For an optional bouquet:

  • Green cotton yarn
  • Floral wire
  • Floral tape or green yarn for wrapping stems
  • Craft wire for leaves, optional

Skill Level

Intermediate

You should know how to make:

  • chain
  • slip stitch
  • single crochet
  • half double crochet
  • double crochet
  • treble crochet
  • double treble crochet
  • working around both sides of a foundation chain
  • working in front and back loops

Abbreviations

This pattern uses US crochet terminology.

ch — chain
sl st — slip stitch
sc — single crochet
hdc — half double crochet
dc — double crochet
tr — treble crochet
dtr — double treble crochet
FLO — front loop only
BLO — back loop only
st / sts — stitch / stitches
sp / sps — space / spaces


Construction

The flower is built in three sections:

  1. Central foundation ring
  2. Three large pointed back petals
  3. Nine raised spiral center petals

The large petals are worked into the back loops of the foundation round.

The raised center is then worked into the unused front loops.

This keeps both layers securely attached while allowing the center to sit above the larger petals.


Foundation Ring

Ch:

10

Join with a sl st to the first chain, taking care not to twist the chain.

You should have a small open ring in the center.


Round 1

Ch 1.

Work:

18 sc around the chain ring

Do not work into individual chains. Insert the hook through the center of the ring and crochet around the entire chain.

Join with a sl st to the first sc.

18 sc

Do not close the center opening.

The small opening is an intentional part of the finished flower.


Three Large Pointed Petals

The outer petals are worked first.

Use the back loops only of the 18 sc from Round 1.

There will be three petals positioned evenly around the center.


Large Petal 1

Join yarn in the BLO of Stitch 1.

Ch:

16

This chain forms the central spine of the petal.

Beginning in the second chain from the hook, work along the first side of the chain:

Sl st in next ch.

Sc in next ch.

Hdc in next ch.

Dc in next ch.

Tr in next ch.

Now work in each of the next 9 chains:

1 dtr, ch 1

You should now have one chain remaining at the tip.


Shape the Point

In the final chain work:

3 dtr, ch 2, 3 dtr

This creates the pointed tip.

Keep the ch-2 space visible at the very top.


Work Down the Opposite Side

3D Spiral Crochet Flower With Three Pointed Petals

Rotate the petal so you can crochet into the unused loops along the opposite side of the foundation chain.

Beginning in the chain immediately below the pointed tip, work across the next 9 chain loops:

1 dtr, ch 1

in each.

Then work:

Tr in next chain loop.

Dc in next.

Hdc in next.

Sc in next.

Sl st in the final chain loop.

You have completed one large pointed petal.

The petal should have:

  • a narrow base
  • tall radiating center stitches
  • open ch-1 spaces
  • a broad center
  • a pointed tip

Anchor Petal 1

Sl st into the BLO of:

Stitch 4 of Round 1

This spreads the base of the petal across several stitches and helps it lie correctly behind the center.

Sl st in the BLO of:

Stitches 5 and 6

You are now ready to begin the second petal.


Large Petal 2

From the BLO of Stitch 7:

Ch 16.

Repeat the complete Large Petal instructions.

After returning to the base of the foundation chain:

Sl st into the BLO of:

Stitch 10

Then sl st through the BLO of:

Stitches 11 and 12


Large Petal 3

From the BLO of Stitch 13:

Ch 16.

Repeat the complete Large Petal instructions.

After finishing the second side of the petal:

Sl st into the BLO of:

Stitch 16

Sl st through the BLO of:

Stitches 17 and 18

Join neatly near the beginning of the first petal.

Fasten off.


Check the Outer Flower

You should now have exactly:

3 large pointed petals

The petals should be spaced evenly at roughly:

120-degree intervals

around the center.

Gently spread them flat.

Each petal should point outward in a different direction, forming a balanced triangular flower silhouette.


Pointed Petal Edging

For a cleaner defined outline, work a simple edging around each large petal.

Join yarn at the base of the first petal.

Sl st loosely along the outside edge.

Work:

1 sl st into each stitch

and:

1 sl st into each ch-1 space

until you reach the ch-2 point.


Tip Picot

In the ch-2 tip space work:

Sc.

Ch 3.

Sl st into the first chain of the ch-3.

Sc again into the same ch-2 space.

This creates a tiny pointed picot at the tip.

Continue slip stitching down the opposite edge.

Fasten off at the base.

Repeat for the remaining two petals.

Keep this edging loose so the petals do not curl inward.


Raised Spiral Center

Return to Round 1.

The front loops of all:

18 sc

should still be unused.

The spiral center contains:

9 raised curled petals

Each spiral petal uses every second stitch of the foundation ring.


Spiral Petal 1

Join yarn in the FLO of Stitch 1.

Ch:

10

Beginning in the second chain from the hook, work:

2 hdc in each chain back toward the center

There are 9 chains to work into.

You will make:

18 hdc

The strip will curl naturally as you crochet.

Do not straighten it.

After the final hdc, sl st back into the same FLO where the petal began.

You have completed the first spiral petal.


Move to the Next Petal

Sl st in the FLO of the next stitch.

Sl st in the FLO of the following stitch.

This places you two stitches farther around the center.

From this stitch:

Ch 10.

Work:

2 hdc in each chain

back toward the center.

Sl st into the same FLO.


Continue the Spiral Petals

Repeat the same process around the entire ring.

You should make petals from the FLO of approximately:

Stitches 1, 3, 5, 7, 9, 11, 13, 15 and 17

This gives:

9 spiral petals

Each petal contains:

  • ch 10
  • 18 hdc
  • a naturally curled shape

After the ninth petal, fasten off.


Arrange the 3D Center

The nine curled petals will initially look like individual spirals.

Use your fingers to turn each curl in the same direction.

For example, arrange every petal clockwise.

Overlap each curl slightly over the next petal.

Keep the central ring visible.

The petals should form a continuous pinwheel around the opening rather than nine completely separate curls.


Secure the Pinwheel Shape

Thread a matching yellow yarn tail onto a yarn needle.

Working from the back of the flower, make a tiny hidden tack stitch at the outer end of the first spiral petal.

Catch the base of the next spiral petal.

Pull gently.

Do not flatten the raised petal.

Repeat around all nine petals.

The goal is only to hold the pinwheel arrangement in place.

Do not sew across the center opening.


Shape the Raised Petals

After securing them, use your fingers to open each spiral slightly.

Each curled petal should have:

  • a thick rounded outer edge
  • a curved crescent shape
  • a raised center
  • visible depth between neighboring petals

The center should stand noticeably above the three large petals behind it.


Final Flower Shape

Lay the flower on a flat surface.

Position the large petals so one points upward and the other two angle down-left and down-right.

Arrange the spiral center so the opening sits directly in the middle.

The finished flower should have:

3 large lace petals

behind:

9 thick spiral petals

with:

1 open center ring


If the Spiral Petals Do Not Curl Enough

The curl comes from working:

2 hdc into every chain

If your yarn produces a flatter strip, make:

3 hdc in every third chain

while keeping 2 hdc in the remaining chains.

For example:

2 hdc, 2 hdc, 3 hdc

repeated along the chain.

This adds extra curvature.

Do not add too many increases or the petals may become tight corkscrews.


If the Spiral Petals Curl Too Tightly

Replace some of the increases with ordinary stitches.

For a gentler curl, work:

2 hdc in one chain, 1 hdc in next

repeated across.

The finished center will be softer and more open.

For the full raised flower shown here, use the original:

2 hdc in every chain

method.


If the Large Petals Curl

Check the edging first.

A tight slip-stitch border can pull the petal inward.

Remove the edging and work it more loosely.

You can also gently dampen the large petals and pin them flat while they dry.

Do not flatten the raised center.


Optional Green Crochet Leaf

For a bouquet, make several pointed green leaves.

Use green cotton yarn and the same 2.5 mm hook.

Ch:

18

Beginning in the second chain from the hook work:

Sl st.

Sc.

Hdc.

Dc.

Tr.

Dtr in each of the next 10 chains.

In the final chain work:

3 dtr, ch 2, 3 dtr

Rotate to work down the opposite side.

Work:

Dtr in the next 10 chain loops.

Tr.

Dc.

Hdc.

Sc.

Sl st.

Fasten off.


Leaf Vein

Join green yarn at the leaf base.

Slip stitch along the central foundation chain toward the tip.

Fasten off near the point.

This creates a raised center vein.

For a more structured bouquet leaf, place a thin floral wire along the back and secure it with small sewing stitches.


Optional Flower Stem

Cut a length of floral wire approximately:

12–14 inches / 30–35 cm

Fold the top ½ inch of wire into a small loop.

Place the loop against the back center of the flower.

Using yellow yarn, sew securely around the wire loop and several foundation stitches.

Do not sew through the visible spiral petals.


Wrap the Stem

Join green yarn near the flower base.

Wrap the yarn firmly around the floral wire.

Continue down the entire stem.

Add a small drop of fabric glue at the bottom if desired.

Alternatively, cover the wire with green floral tape.


Attach the Leaves

Position the leaves at different heights along the stem.

Using their yarn tails or green sewing yarn, wrap and stitch each leaf base securely around the stem.

For a natural bouquet, alternate the leaf directions rather than placing every leaf on the same side.


Making a Crochet Bouquet

Make several flowers using the same pattern.

For a full bouquet, try:

5 flowers

with:

8–10 green leaves

Arrange the flowers at slightly different heights.

Gather the stems together.

Tie with:

  • raffia
  • cotton cord
  • ribbon
  • jute twine

This creates a permanent crochet flower bouquet.


Using the Flower as an Appliqué

Skip the stem.

Leave the back of the flower flat.

Use matching yarn and a yarn needle to sew through:

  • the foundation ring
  • the bases of the three large petals

Attach it to:

  • crochet bags
  • pillows
  • hats
  • wall hangings
  • wreaths
  • blankets

Avoid sewing through the raised spiral petals.


Making a Smaller Flower

Use:

  • sport-weight #2 yarn
  • 2 mm hook

For smaller outer petals, change:

ch 16

to:

ch 13

For the spiral petals, change:

ch 10

to:

ch 8

Keep:

3 outer petals

and:

9 spiral petals

so the overall flower design remains the same.


Making a Larger Flower

Use:

  • medium weight #4 cotton
  • 3.5–4 mm hook

Keep the stitch counts unchanged.

The heavier yarn automatically produces a larger flower.

For very large decorative flowers, increase the large-petal foundation from:

ch 16

to:

ch 19

and use:

ch 12

for each center spiral.


Final Pattern at a Glance

Foundation

Ch 10 and join into a ring.

Round 1

18 sc around ring.

18 sc


Outer Layer

Work into BLO.

Make:

3 large pointed petals

Each petal begins with:

ch 16

Work progressively taller stitches along one side:

sl st → sc → hdc → dc → tr → dtr

Create the point with:

3 dtr, ch 2, 3 dtr

Then mirror the stitches down the opposite side.

Space all three petals evenly around the 18-stitch foundation.

Add a slip-stitch outline and a small picot at each point.


Center Layer

Work into the unused FLO.

Make:

9 spiral petals

For each petal:

ch 10

then:

2 hdc in every chain back

for:

18 hdc per petal

Arrange all nine curls in the same direction to form a raised pinwheel.

Secure them lightly with hidden stitches.


The completed flower has a deep three-dimensional spiral center, nine raised curled petals, three large pointed lace petals, and a small open center, creating a dramatic sunflower-yellow crochet flower that works beautifully alone or as part of a handmade bouquet.