Bell Flower Crochet Coaster With 3D Lavender Blossoms

Bell Flower Crochet Coaster With 3D Lavender Blossoms

This decorative flower coaster combines a flat white circular center, a green leafy border, and 16 raised lavender bell flowers around the outside edge.

The coaster begins as a simple double-crochet circle. A green openwork round is then added around the edge, creating 16 evenly spaced attachment points. Small green calyx shapes sit behind each flower, while the lavender blossoms are crocheted directly onto the border so there are no loose flower appliqués to sew on afterward.

The finished coaster measures approximately 5½ inches / 14 cm across, making it large enough for mugs, cups, small bowls, or decorative table settings.


Finished Size

Approximately:

5½ inches / 14 cm diameter

White center:

approximately 3–3¼ inches / 7.5–8 cm diameter

Finished flower border:

approximately 1–1¼ inches / 2.5–3 cm deep

The coaster contains:

16 green calyx sections

and:

16 lavender flowers


Materials

  • Fingering weight / #1 cotton yarn
  • Approximately 20–50 yards total
  • 3 mm crochet hook
  • Yarn needle
  • Scissors
  • Stitch marker, optional

Use three colors:

Color A — White
for the center.

Color B — Leaf Green
for the outer framework and calyxes.

Color C — Lavender / Lilac
for the 3D flowers.

Cotton yarn works especially well because it produces a firm coaster and crisp flower shapes.


Skill Level

Confident beginner

You should know how to make:

  • magic ring
  • chain
  • slip stitch
  • single crochet
  • half double crochet
  • double crochet
  • increases
  • working several stitches into one space
  • simple crochet clusters

Abbreviations

This pattern uses US crochet terminology.

MR — magic ring
ch — chain
sl st — slip stitch
sc — single crochet
hdc — half double crochet
dc — double crochet
st / sts — stitch / stitches
sp / sps — space / spaces
inc — 2 dc in the same stitch
3dc-cl — 3-double-crochet cluster


Special Stitch — 3-Double-Crochet Cluster

Yarn over.

Insert the hook into the indicated space.

Yarn over and pull up a loop.

Yarn over and pull through 2 loops.

Leave the remaining loops on the hook.

Repeat this sequence 2 more times into the same space.

You should have:

4 loops on the hook

Yarn over.

Pull through all 4 loops.

One 3dc cluster is complete.

These clusters form the rounded petals of each lavender flower.


WHITE CIRCULAR BASE

Work in joined rounds.

The beginning ch-3 counts as the first double crochet unless stated otherwise.


Bell Flower Crochet Coaster With 3D Lavender Blossoms

Round 1

With white yarn, make a magic ring.

Ch 3.

Work:

11 dc into the MR

Pull the ring closed.

Join with a sl st to the top of the beginning ch-3.

12 dc


Round 2

Ch 3.

Work:

1 dc in the same stitch

Then work:

2 dc in every remaining stitch

around.

Join.

24 dc


Round 3

Ch 3.

Work:

2 dc in the next stitch

Repeat:

1 dc in next st, 2 dc in next st

around.

Join.

36 dc


Round 4

Ch 3.

Dc in the next stitch.

Work:

2 dc in the next stitch

Repeat:

dc in next 2 sts, 2 dc in next st

around.

Join.

48 dc

The white center should lie flat.

It should measure approximately:

3–3¼ inches / 7.5–8 cm across

depending on tension.


Round 5 — Firm White Edge

Ch 1.

Sc in the same stitch.

Sc in every stitch around.

Join with a sl st.

48 sc

Fasten off white.

This round firms the edge before the decorative flower border begins.


GREEN FLOWER FOUNDATION

The 48-stitch center divides perfectly into:

16 sections of 3 stitches

Each section will support one flower.


Green Round 1 — 16 Open Arches

Join green yarn in any stitch.

Ch 1.

Sc in the same stitch.

Ch:

3

Skip the next:

2 stitches

Sc in the next stitch.

Continue:

ch 3, skip 2 sts, sc in next st

around.

After the final ch-3, skip the last 2 stitches and join with a sl st to the first sc.

You should have:

16 green ch-3 spaces

These spaces should be evenly distributed around the coaster.


Green Round 2 — Calyx Points

Sl st into the first ch-3 space.

In that space work:

1 sc

ch 2

1 dc

ch 2

1 sc

This creates one small green pointed calyx.

Move directly into the next ch-3 space and repeat:

sc, ch 2, dc, ch 2, sc

Continue around.

You should have:

16 green calyxes

Each calyx has a central dc that becomes the flower attachment point.

Join to the first sc.

Fasten off green.


Check the Green Border

Lay the coaster flat.

You should see:

  • 16 evenly spaced green sections
  • one central dc in each section
  • small green openings on either side of every central dc
  • no ruffling
  • no tight pulling around the white center

If the green border cups upward, loosen your chains slightly.

If it ruffles strongly, tighten the ch-2 sections.


LAVENDER BELL FLOWERS

Each flower is worked directly onto the central dc of one green calyx.

You will make:

16 flowers total

The flower begins with a tiny loop, and five cluster petals are worked into that loop.

This makes the blossom slightly raised rather than completely flat.


Flower 1 — Create the Flower Ring

Join lavender yarn at the top of the central green dc.

Ch:

4

Sl st back into the same green dc.

You have created a small ch-4 loop.

Do not tighten the loop too much.


Flower Petal 1

Working into the ch-4 loop:

Ch:

2

Work:

1 3dc-cl

into the loop.

Ch:

2

Sl st into the same ch-4 loop.

One petal is complete.


Remaining Flower Petals

Repeat:

ch 2, 3dc-cl in ring, ch 2, sl st in ring

until you have:

5 petals total

Fasten off.

The five cluster petals should form a small raised blossom around the ch-4 center.


Repeat for All 16 Flowers

Attach lavender yarn to the next green central dc.

Make another:

ch-4 ring

Then work:

5 cluster petals

Repeat around the entire coaster.

The finished outer edge should contain exactly:

16 lavender flowers


Make the Flowers Look More Like Bells

After all flowers are finished, gently pinch each blossom at its base.

Use your fingers to push the five petals slightly upward.

Do not flatten them during blocking.

The petals should form a shallow cup or bell shape.

The flowers should sit just beyond the green calyxes rather than lying completely flat against the white center.


Optional Fuller Flower

If you want a chunkier flower similar to a small hydrangea or bell cluster, replace each:

3dc-cl

with a:

4dc-cl

To make a 4dc cluster, partially work four dc into the same loop and close all five remaining loops together.

Keep:

5 petals per flower


Optional Two-Color Flowers

For a mixed floral border, alternate:

lavender flower

then:

white flower

around the coaster.

Because there are 16 flower positions, this produces:

8 lavender flowers

and:

8 white flowers

For the closest look to the all-lavender coaster, use lavender for all 16.


Weaving In the Ends

Because the border contains several flowers, there will be multiple yarn tails.

For each flower:

Thread the tail onto a yarn needle.

Pass through several lavender stitches at the back of the flower.

Change direction.

Pass through several more stitches.

Trim close to the fabric.

Do not pull tightly enough to flatten the blossom.


BLOCKING THE COASTER

Block the white center and green border while preserving the three-dimensional flowers.

Lightly dampen the coaster.

Lay it on a blocking mat.

Pin the white center flat.

Straighten the green calyxes.

Arrange all 16 flowers evenly.

Do not pin directly through the flower petals.

Allow the coaster to dry completely.


Finished Shape

The completed coaster should have:

  • flat white center
  • circular 48-stitch edge
  • 16 green openwork sections
  • 16 small green pointed calyxes
  • 16 lavender five-petal flowers
  • softly raised floral border
  • approximately 5½-inch finished diameter

The center must remain flat enough to hold a mug securely.


If the White Center Ruffles

Check your stitch counts.

They should be:

Round 1 — 12

Round 2 — 24

Round 3 — 36

Round 4 — 48

If your counts are correct but the circle still ruffles significantly, your tension may be loose.

Try a:

2.75 mm hook

for the center.


If the White Center Cups

Make sure no increases were missed.

If the stitch counts are correct, your tension may be too tight.

Try:

3.25 mm

for the white center and return to the 3 mm hook for the flower border.


If You Have the Wrong Number of Flowers

The green foundation controls the flower count.

Round 5 contains:

48 stitches

Green Round 1 uses:

1 anchor stitch for every 3 white stitches

So:

48 ÷ 3 = 16

You should therefore have exactly:

16 ch-3 spaces

and:

16 flowers

If you have 15 or 17 flowers, check where you skipped stitches in the green foundation round.


If the Green Border Ruffles

Each green arch should span:

3 white stitches

Do not accidentally anchor into every second stitch.

Also make sure every arch contains exactly:

ch 3


If the Flowers Look Too Flat

Check the small center ring.

Each flower should begin with:

ch 4 joined back to the same green dc

All five petals are worked into this loop.

The shared loop lets the petals crowd together and rise naturally.

After finishing, gently cup the petals with your fingers.


If the Flowers Are Too Bulky

Use:

2dc clusters

instead of 3dc clusters.

This creates a lighter, flatter flower.

Keep the same:

5 petals

and:

16 flowers


If the Flowers Crowd Each Other

The flowers are supposed to touch slightly, but they should not completely cover one another.

If your blossoms are very large:

  • tighten the ch-2 sections around each petal
  • use a 2.75 mm hook for the flower round
  • use 2dc clusters

If the Coaster Will Be Used Every Day

Cotton yarn is the best choice because it:

  • absorbs condensation
  • lies flatter than acrylic
  • tolerates frequent washing
  • gives good stitch definition
  • withstands warm mugs better than many synthetic fibers

Allow the coaster to dry flat after washing.


Making a Set of Four

For a coordinated coaster set, make:

4 identical coasters

Try:

white + lavender + green

for all four,

or make different flower colors such as:

  • lavender
  • soft pink
  • pale blue
  • cream

Keep the green calyxes and white center consistent so the set looks coordinated.


Making a Larger Mug Mat

Continue increasing the white circle before adding the flowers.

After the 48-stitch round:

Additional Round

Ch 3.

Dc in the next 2 stitches.

Work:

2 dc in next st

Repeat:

dc in next 3 sts, 2 dc in next st

around.

You will have:

60 dc

Because 60 divides evenly by 3, the green border can contain:

20 flower sections

instead of 16.

The larger version works well as a small trivet or decorative mug mat.


Making a Smaller Coaster

Stop the white circle at:

36 dc

Because:

36 ÷ 3 = 12

you can make:

12 green sections

and:

12 flowers

This produces a smaller floral coaster.


Matching Flower Basket Idea

These coasters can also be stacked together inside a small crochet basket.

When several purple-flower coasters are stacked vertically, the flowers around the edges resemble a small bouquet.

A simple shallow round basket in cream or green makes an attractive handmade gift set.


Final Pattern at a Glance

White Center

Round 1

12 dc in MR.

Round 2

2 dc in every stitch.

24 dc

Round 3

Dc, inc.

36 dc

Round 4

Dc in next 2, inc.

48 dc

Round 5

Sc around.

48 sc

Fasten off.


Green Border

Round 1

Repeat:

sc, ch 3, skip 2

around.

16 ch-3 spaces

Round 2

In every ch-3 space work:

sc, ch 2, dc, ch 2, sc

16 green calyxes

Fasten off.


Lavender Flowers

At the central dc of every green calyx:

ch 4

Join back to the same dc to form a ring.

Into that ring make 5 petals.

Each petal:

ch 2, 3dc-cl, ch 2, sl st

Repeat around.

Fasten off.

Make:

16 flowers total

The completed Bell Flower Crochet Coaster measures approximately 5½ inches / 14 cm across, with a flat white cotton center surrounded by a green leafy framework and a full ring of dimensional lavender bell-shaped blossoms.