Crochet Lily of the Valley Keychain Free Pattern

Crochet Lily of the Valley Keychain Free Pattern

This crochet lily of the valley keychain is a sweet handmade accessory with a green hanging loop, a pair of shaped leaves, two slender stems, and two soft bell-shaped flowers. The small floral design looks lovely attached to a handbag, zipper pouch, backpack, or keyring.

The pattern uses chains, basic crochet stitches, bobble stitches, and simple assembly. Make the flowers in white for a traditional lily of the valley look, or use pink, lavender, or blue yarn for a colorful crochet bag charm.

Description

The finished crochet keychain has a long green chain folded into a hanging loop. A two-leaf motif sits beneath the loop, while the two loose cord ends become flower stems. Each flower begins with a small green cup and is completed with six full bobble sections surrounded by a softly flared petal edge. Two matching flowers hang beneath the leaves to create the finished lily of the valley design.

Materials

  • Green yarn for the hanging cord, leaves, stems, and flower cups
  • Small amount of white, pink, lavender, blue, or another flower color
  • Crochet hook suitable for the selected yarn
  • Yarn needle
  • Scissors
  • Stitch marker, optional

Abbreviations

  • ch – chain
  • dc – double crochet
  • hdc – half double crochet
  • MR – magic ring
  • sc – single crochet
  • sl st – slip stitch
  • sp – space
  • st – stitch
  • sts – stitches

Pattern Notes

  • This pattern uses US crochet terminology.
  • The hanging cord is made first with 55 chains.
  • The leaf piece is crocheted around both sides of one foundation chain.
  • The two slip stitches near the center of the leaf piece help create the separation between the leaves.
  • Each flower begins with green yarn and is finished with a contrasting flower color.
  • Make two identical flowers.
  • The bobble stitch is worked by pulling up six yarn-over loops in the same space.
  • Keep the hanging chain relaxed so it folds smoothly into a loop.
  • Do not cut the cord tails short. They are used as the two flower stems.

Step-by-Step Instructions

Crochet Lily of the Valley Keychain Free Pattern

Crochet the Hanging Cord

Using green yarn, make a slip knot.

Ch 55.

Cut the yarn, leaving a useful tail at both ends of the chain.

Set the cord aside.

Do not weave in the ends because they will be used to attach the flowers.

Crochet the Double-Leaf Motif

Using green yarn, make a slip knot.

Ch 16.

First Side of the Foundation Chain

Starting in the second ch from the hook, work:

  • 1 sc in the next ch
  • 1 hdc in the next ch
  • 1 dc in each of the next 3 ch
  • 1 hdc in the next ch
  • 1 sc in the next ch
  • 1 sl st in the next ch
  • 1 sc in the next ch
  • 1 hdc in the next ch
  • 1 dc in each of the next 3 ch
  • 1 hdc in the next ch
  • 3 sc in the final ch

The three single crochet stitches turn the work so you can continue along the opposite side of the foundation chain.

Opposite Side of the Foundation Chain

Working into the unused loops on the opposite side, work:

  • 1 hdc in the next st
  • 1 dc in each of the next 3 sts
  • 1 hdc in the next st
  • 1 sc in the next st
  • 1 sl st in the next st
  • 1 sc in the next st
  • 1 hdc in the next st
  • 1 dc in each of the next 3 sts
  • 1 hdc in the next st
  • 2 sc in the final st

Join with a sl st in the first sc.

Ch 1.

Cut the yarn and pull it through the final loop.

Weave in the leaf yarn tails.

Gently shape the piece so the two sides form a matching pair of leaves with a narrow center between them.

Crochet the Green Flower Cup

Make two identical flower cups.

Using green yarn, make an MR.

Round 1

Ch 1. This chain does not count as a stitch.

Work 5 sc into the MR.

Pull the ring closed.

Join with a sl st in the first sc.

You should have 5 sc.

Round 2

Ch 3.

Place a marker in the third chain if desired.

Ch 1.

Work the following in each of the 5 sc:

  • 1 dc in the next st
  • Ch 1

Repeat around.

Join with a sl st in the marked third chain.

Ch 1 and fasten off the green yarn.

The beginning ch 3 and the five double crochet stitches create six sections, with six open spaces around the flower cup.

Crochet the Bobble Flower

Join the flower-colored yarn in any open space from Flower Cup Round 2.

Ch 2.

Bobble Stitch

Work the following in the same space:

  1. Yarn over.
  2. Insert the hook into the space.
  3. Yarn over and pull up a loop.

Repeat these three movements six times in the same space.

Yarn over and pull through all loops on the hook.

One bobble is complete.

Ch 1.

Bobble Round

Work 1 bobble and ch 1 in each of the six open spaces around the green flower cup.

After completing the final bobble, join with a sl st in the marked beginning chain.

Ch 1.

You should have six bobbles with six spaces between them.

Add the Flared Flower Edge

Work into the spaces between the bobbles.

In each of the six spaces, work:

  • 1 sc
  • 2 dc
  • 1 sc

Repeat in every space around.

Join with a sl st in the first sc.

Ch 1.

Cut the yarn and pull it through the final loop.

Weave in the flower-colored yarn tails.

The single crochet stitches pull each section inward, while the two double crochet stitches create the softly flared bell-shaped edge.

Make a second identical flower.

Assemble the Keychain

Position the Hanging Cord

Fold the 55-chain cord in half so the center forms the hanging loop.

The two cut yarn ends should hang downward evenly.

Thread both cord ends through a yarn needle together.

Insert the needle through the two central slip-stitch areas of the leaf motif.

Pull the cord through until the leaves sit directly beneath the folded hanging loop.

Arrange the leaves so one points toward the left and the other toward the right.

The two cord ends should now hang below the leaf motif as separate flower stems.

Attach the First Flower

Thread one green cord end through the yarn needle.

Insert the needle through the center of the magic ring on the first flower cup.

Pull the cord through until the flower hangs at the desired distance below the leaves.

Tie the cord end securely to the remaining flower tail or to a secure green stitch at the center of the flower.

Trim the excess yarn carefully.

Hide the knot inside the flower cup.

Attach the Second Flower

Repeat the same process with the second green cord end and the second flower.

Adjust the stems so the two flowers hang at approximately the same height or with one flower slightly lower for a natural arrangement.

Tie securely, trim the excess yarn, and hide the knot inside the flower.

Final Shaping

Straighten the hanging loop.

Arrange the leaves evenly beneath it.

Gently cup each flower with your fingers so the bobbles point downward and the petal edges flare outward.

Check that:

  • The cord is secure inside the leaves
  • Both flowers are firmly attached
  • All yarn ends are hidden
  • The hanging loop is large enough for its intended use
  • The two stems are not twisted

Tips and Variations

Use smooth cotton yarn for crisp leaves and well-defined flowers.

A smaller hook creates firmer flowers that keep their bell shape. A slightly larger hook produces softer and more flexible petals.

For a traditional lily of the valley keychain, use medium green yarn with white flowers.

For a pastel version, pair soft green with pink, lilac, baby blue, or peach flowers.

Make both flowers the same color for a coordinated design, or use two different shades for a playful keychain.

Keep the bobble loops similar in height. Uneven loops can make one side of the flower look larger.

When pulling through all the bobble loops, rotate the hook slightly downward to reduce snagging.

The chain loop can be passed directly through a handbag strap or zipper pull. A separate metal clasp is not necessary for the original design.

For a fuller floral charm, make three flowers and divide the cord ends into three stems during assembly.

Frequently Asked Questions

Why does the flower cup have six spaces after beginning with five single crochet stitches?

The beginning ch 3 acts as one upright section. It is followed by five double crochet stitches, creating six sections and six open spaces around the cup.

How many flowers do I need?

The keychain shown in this pattern uses two matching flowers.

Can I make the flowers without bobble stitches?

The bobble stitches create the full, rounded flower shape. Replacing them with ordinary double crochet will produce a flatter flower that does not match the same design.

How is the hanging loop attached?

The 55-chain cord is folded in half. Both ends are pulled through the two center slip-stitch areas of the leaf motif, leaving the folded center above the leaves as the hanging loop.

Can I add keychain hardware?

Yes. A jump ring or lobster clasp may be attached to the green chain loop, but the original design can be used without metal hardware.

Conclusion

This crochet lily of the valley keychain is a charming way to turn small amounts of leftover yarn into a handmade floral accessory. The paired leaves, delicate stems, and two bobble flowers create a detailed design while using beginner-friendly crochet techniques. Save the pattern and make a collection in white, pink, lavender, or blue for gifts, bag charms, and spring craft projects.