Elegant Raised Pebble & Ridge Crochet Baby Blanket
The Elegant Raised Pebble & Ridge Crochet Baby Blanket is a one-piece textured blanket worked from the bottom edge upward in warm cream worsted-weight yarn. Its texture comes from two elements that repeat throughout the body: rounded 5-dc bobbles that form the raised pebbles, and back-loop single-crochet rows that create low horizontal ridges.
This corrected Yarnimals version is written as one complete standalone pattern. The stitch counts, row counts, pebble counts, gauge, side-edge border placement, and finished dimensions are all locked to the same construction.
Finished Size and Construction
- Finished size after blocking: approximately 32 x 38 inches (81 x 97 cm)
- Center panel before border: approximately 30 x 36 inches (76 x 91 cm)
- Body width: 112 stitches
- Total body rows: 90 rows, including the foundation row and final balancing row
- Texture repeat: 8 rows, repeated 11 times
- Total bobbles: 275 — eleven 13-bobble rows and eleven 12-bobble rows
- Yarn: #4 worsted-weight, smooth and baby-friendly
- Color: warm cream
- Hook: 5.0 mm H-8, or size needed to match gauge
- Construction: one flat rectangle worked in turned rows, followed by 3 joined border rounds
Materials
- Approximately 1,250-1,400 yards (1,143-1,280 m) of #4 worsted-weight yarn in warm cream
- 5.0 mm crochet hook
- Optional 5.5 mm hook if your BLO single-crochet rows pull noticeably tighter than the hdc rows
- 4 locking stitch markers
- Tapestry needle
- Scissors
- Flexible measuring tape
Gauge
After gentle blocking, aim for approximately 15 stitches and 10 rows = 4 inches (10 cm) in the established texture pattern. Measure over a section that includes both smooth rows and a pebble row rather than measuring directly across a bobble.
At this gauge, 112 stitches produce a center width of about 30 inches and 90 body rows produce a center length of about 36 inches. The three border rounds add roughly 1 inch on each side, bringing the blanket to approximately 32 x 38 inches.
Abbreviations
- ch = chain
- sc = single crochet
- hdc = half double crochet
- dc = double crochet
- sl st = slip stitch
- st(s) = stitch(es)
- BLO = back loop only
- RS = right side
- WS = wrong side
Important Pattern Notes
- The turning ch 1 never counts as a stitch.
- Work the first actual stitch into the first stitch of each row and the last actual stitch into the final stitch.
- Every body row contains exactly 112 stitches.
- Each bobble occupies one stitch position. Do not work another stitch into the same base stitch after completing the bobble.
- Push each completed bobble toward the RS before continuing.
- Count the 112 stitches at the end of every bobble row until the placement becomes automatic.
Special Stitch: 5-dc Bobble
Yarn over, insert the hook into the indicated stitch, yarn over and pull up a loop, yarn over and pull through 2 loops. Leave the remaining loops on the hook. Repeat this partial-double-crochet sequence four more times in the same base stitch. You will have 6 loops on the hook. Yarn over and pull through all 6 loops. The completed bobble counts as one stitch.
Texture Placement
13-bobble row: 3 sc + 1 bobble + twelve repeats of (7 sc + 1 bobble) + 12 sc = 112 stitches.
12-bobble row: 7 sc + 1 bobble + eleven repeats of (7 sc + 1 bobble) + 16 sc = 112 stitches.
Construction Overview
Begin with 112 hdc. Work the 8-row texture sequence 11 times. Add one final hdc row so the upper edge mirrors the smooth lower edge. The body then has exactly 90 rows. Without fastening off, work three border rounds. On the long sides, the first border round uses 135 single crochets over the 90 row ends so the side-edge stitch density matches the width gauge and the border lies flat.

Detailed Pattern
Foundation
Ch 113.
Foundation Row (WS): Hdc in 2nd ch from hook and in each remaining ch across. Turn. 112 hdc.
Eight-Row Texture Repeat
Row 1 (RS): Ch 1, hdc in first st and in each st across. Turn. 112 hdc.
Row 2 (WS ridge): Ch 1, sc in BLO of first st and in BLO of each st across. Turn. 112 sc.
Row 3 (RS, 13 pebbles): Ch 1. Sc in first 3 sts, bobble in next st, *sc in next 7 sts, bobble in next st* 12 times, sc in final 12 sts. Turn. 112 sts; 13 bobbles.
Row 4 (WS): Ch 1, hdc in first st and in each st across, working once into the top of every sc and every bobble. Turn. 112 hdc.
Row 5 (RS): Ch 1, hdc in first st and in each st across. Turn. 112 hdc.
Row 6 (WS ridge): Ch 1, sc in BLO of first st and in BLO of each st across. Turn. 112 sc.
Row 7 (RS, 12 offset pebbles): Ch 1. Sc in first 7 sts, bobble in next st, *sc in next 7 sts, bobble in next st* 11 times, sc in final 16 sts. Turn. 112 sts; 12 bobbles.
Row 8 (WS): Ch 1, hdc in first st and in each st across. Turn. 112 hdc.
Repeat Rows 1-8 until you have completed the full 8-row sequence 11 times total. At this point you have worked 89 rows including the foundation row.
Final Body Row, Row 90 (RS): Ch 1, hdc in each st across. Do not turn and do not fasten off. 112 hdc.
Body Check Before the Border
- Stitch count across: 112
- Total rows: 90
- 13-bobble rows: 11
- 12-bobble rows: 11
- Total bobbles: 275
- Approximate blocked center size at gauge: 30 x 36 inches
Three-Round Border
Side-Edge Distribution
Each long side contains 90 row ends. To create 135 sc along each long side, work 3 sc across every 2 row ends. Use this rhythm: 2 sc in the first row end, 1 sc in the next row end; repeat the pair all the way down the side. Forty-five pairs produce exactly 135 sc.
Border Round 1 — 502 stitches
Continue from the end of Row 90 with the RS facing.
Ch 1. Work 3 sc in the first top corner stitch. Sc in each of the next 110 stitches across the top. Work 3 sc in the final top corner stitch.
Work 135 sc down the first long side using the 2-sc, 1-sc distribution.
Across the bottom foundation edge, work 3 sc in the first bottom corner position, sc evenly across the next 110 foundation positions, then 3 sc in the final bottom corner position.
Work 135 sc up the second long side. Join with sl st to the first sc. 502 sc total.
Border Round 2 — 510 stitches
Ch 1. Hdc in each stitch around. At each corner, identify the center stitch of the 3-sc corner group from Round 1 and work 3 hdc in that center stitch instead of 1 hdc. Join with sl st to first hdc. 510 hdc total.
Border Round 3 — 518 stitches
Ch 1. Sc in BLO of each hdc around. At each corner, work 3 BLO sc in the center stitch of the 3-hdc corner group. Join with sl st to first sc. 518 sc total. Fasten off.
Blocking and Finishing
Weave in all ends on the WS, changing direction at least once so the tails remain secure. Wash or dampen the blanket according to the yarn-care label. Lay it flat and shape it to approximately 32 x 38 inches, keeping all four corners square. Do not stretch the bobbles flat. Allow the blanket to dry completely.
Because this is a baby item, inspect every join and tail before use. Do not add buttons, beads, tassels, pom-poms, or other removable embellishments.
Visual Checkpoints
After the first Row 3: count exactly 13 pebbles. The first pebble appears after 3 sc and the final 12 stitches are plain sc.
After the first Row 7: count exactly 12 pebbles. They should sit between the pebble columns of Row 3 rather than directly above them.
After one complete 8-row repeat: you should see two low horizontal BLO ridges and two offset pebble rows.
After six repeats: count 112 stitches across and check the side edges for accidental narrowing.
Before Border Round 2: Round 1 should lie flat. If it ruffles, your side-edge stitches are too loose; if it pulls inward, they are too tight.
Troubleshooting
My stitch count drops after a bobble
The stitch immediately after a bobble is easy to miss. Remember that the bobble replaces one stitch and the next sc goes into the next unused base stitch.
The bobbles sit on the wrong side
All bobble rows are RS rows. Push each bobble toward the RS immediately after closing the 6 loops.
The BLO ridges contract the width
Relax your tension on Rows 2 and 6. If necessary, use a 5.5 mm hook for only the BLO sc rows, then return to the 5.0 mm hook.
The side borders ripple
Recheck the long-side distribution. Each side should contain 135 sc in Round 1, not one sc per row end.
The finished blanket is not 32 x 38 inches
Compare your blocked gauge with 15 stitches and 10 rows per 4 inches. A blanket worked at a different gauge will finish at a different size even when all stitch counts are correct.
Pattern at a Glance
- Ch 113; Foundation Row = 112 hdc.
- Repeat the 8-row texture sequence 11 times.
- Work one final hdc row for 90 total body rows.
- Total bobbles: 275.
- Border Round 1 = 502 sc.
- Border Round 2 = 510 hdc.
- Border Round 3 = 518 BLO sc.
- Block to approximately 32 x 38 inches.
The finished blanket is a single coherent construction: 112 stitches wide, 90 rows long, 275 raised pebbles, two horizontal ridge rows per texture repeat, and a mathematically balanced three-round border.