Pink Flower Trim Crochet Bag Pattern

September 13, 2026 Pink Flower Trim Crochet Bag Pattern

This cheerful crochet tote combines a simple white openwork body with dimensional pink five-petal flowers used as decorative trim around the bag and handles.

The exact construction of the pictured pattern cannot be determined from a single image, so the instructions below are an original bag pattern built around the same broad visual idea: a white lattice-style crochet bag, separately crocheted pink flower motifs, structured sides, and flower-decorated handles.

The flowers are made individually and sewn onto the finished bag, which makes the design much easier to customize. You can use a few flowers for a simple version or cover the edges and handles for a more dramatic look.

Skill Level

Confident Beginner / Intermediate

You should know how to:

  • chain
  • slip stitch
  • single crochet
  • double crochet
  • work in chain spaces
  • crochet in rounds
  • sew crochet pieces together
  • attach appliqués

Finished Size

Approximate finished bag:

  • 11½ inches wide
  • 10½ inches tall
  • 3½ inches deep
  • 9–10 inch handle drop

The size can easily be adjusted by adding or removing mesh repeats.

Materials

  • Medium #4 cotton or cotton-blend yarn in white
  • Approximately 450–550 yards white
  • Medium #4 cotton or cotton-blend yarn in bright pink
  • Approximately 250–325 yards pink
  • 4 mm crochet hook
  • Yarn needle
  • Scissors
  • Stitch markers
  • Measuring tape

Optional:

  • Cotton fabric for lining
  • Magnetic snap
  • Plastic canvas for reinforcing the base
  • Cotton webbing for reinforcing the handles

Abbreviations — US Terms

ch – chain
sl st – slip stitch
sc – single crochet
hdc – half double crochet
dc – double crochet
st(s) – stitch(es)
sp – space
ch-sp – chain space

Special Stitches

Mesh Block

Work:

dc in next dc, ch 2, skip 2 sts

The next dc begins the next block.

Five-Petal Flower

Each flower is worked separately from the center outward.

The petals are made from several tall stitches worked into the same chain space.


Pink Flower Trim Crochet Bag Pattern

PART 1 — Make the Front Panel

Use white yarn.

The bag body uses a simple open lattice made from double crochet stitches and ch-2 spaces.

Foundation

Chain 45.

Row 1

Dc in the 4th chain from the hook.

The skipped chains count as the first dc.

Ch 2.

Skip the next 2 chains.

Dc in the next chain.

Repeat:

ch 2, skip 2 ch, dc in next ch

across.

You should finish with a dc in the final chain.

You now have a row of evenly spaced square openings.

Ch 3 and turn.

Row 2

The turning ch-3 counts as the first dc.

Ch 2.

Dc in the next dc.

Repeat across:

ch 2, dc in next dc

Do not work into the ch-2 spaces.

Ch 3 and turn.

Rows 3–18

Repeat Row 2.

Keep the mesh openings vertically aligned.

After Row 18, the panel should measure approximately:

11–11½ inches wide × 9–9½ inches tall

Do not fasten off yet.


PART 2 — Strengthen the Front Panel Edges

The open mesh needs a firmer border before the bag is assembled.

Border Round

Ch 1.

Work sc evenly around all four sides of the panel.

Across the top and bottom:

Work approximately 1 sc in each dc and 2 sc in each ch-2 space.

Along each side:

Work approximately 2 sc around each row-end dc.

At each corner:

Work 3 sc.

Join with a sl st.

Fasten off.

The panel should remain flat.

If the edge ruffles, reduce the number of side stitches slightly.


PART 3 — Make the Back Panel

Repeat the complete front-panel instructions.

You should now have:

2 identical white mesh rectangles

Block them gently so both panels have the same dimensions.


PART 4 — Crochet the Bottom and Side Gusset

The gusset creates the bottom and side depth of the tote.

Use white yarn.

Foundation

Chain 13.

Row 1

Sc in the second chain from the hook and across.

12 sc

Ch 1 and turn.

Row 2

Sc in every stitch across.

12 sc

Ch 1 and turn.

Continue

Repeat Row 2 until the strip is long enough to travel:

  • up one side of the front panel
  • across the bottom
  • up the opposite side

For an 11½ × 9½ inch panel, the gusset should measure approximately:

30–31 inches long

Do not rely entirely on row count.

Measure the strip directly against the panel.

Fasten off, leaving a long sewing tail.


PART 5 — Attach the Gusset to the Front

Lay the front panel flat.

Beginning at the upper-left corner, pin one long edge of the gusset down:

  • first side
  • across bottom
  • second side

The short ends of the gusset should stop at the top corners.

Using matching white yarn, sew or single crochet the gusset to the panel.

If crocheting the seam:

Insert the hook through both the panel edge and gusset edge.

Work sc evenly through both layers.

Keep the seam relaxed.


PART 6 — Attach the Back Panel

Place the back panel against the free edge of the gusset.

Make sure:

  • top edges line up
  • corners line up
  • bag is not twisted

Join the back panel to the gusset using the same method.

Turn the bag right side out.

You now have a rectangular open-top bag approximately 3½ inches deep.


PART 7 — Strengthen the Top Opening

Attach white yarn at one side seam.

Top Round 1

Work sc evenly around the entire opening.

Join with a sl st.

Top Round 2

Ch 1.

Sc in every stitch around.

Join.

Top Round 3

Repeat Round 2.

Fasten off.

The top edge should now feel noticeably firmer than the mesh body.


PART 8 — Crochet the Pink Flowers

Make approximately 24 flowers for the version shown here.

You can make more or fewer depending on how densely you want to decorate the tote.

Use pink yarn.

Flower Center

Make a magic ring.

Ch 1.

Work:

10 sc into the ring

Pull the ring closed.

Join with a sl st to the first sc.

10 sts

Petal Setup Round

Ch 1.

Repeat around:

sc in next st, ch 3, skip next st

You should create:

5 ch-3 spaces

Join with a sl st.

These spaces form the foundations for the five petals.


PART 9 — Crochet the Five Petals

Sl st into the first ch-3 space.

In that space work:

sc, hdc, 3 dc, hdc, sc

You have completed one rounded petal.

In each remaining ch-3 space work:

sc, hdc, 3 dc, hdc, sc

You should have exactly:

5 petals

Join with a sl st.

Fasten off, leaving a long tail for sewing.


Flower Shape

Each flower should have:

  • a small circular center
  • exactly 5 rounded petals
  • slightly raised dimensional texture
  • approximately 2–2¼ inch diameter

Gently shape the petals with your fingers.

If necessary, lightly block the flowers before attaching them.


PART 10 — Optional Defined Flower Center

For a more decorative center, join a darker shade of pink or matching pink yarn through the center.

Work a few tight surface stitches around the opening.

Alternatively, sew several small French knots into the center.

Keep the center subtle so the five-petal shape remains the main feature.


PART 11 — Arrange the Flowers on the Bag

Before sewing anything, place all the flowers on the bag.

A balanced arrangement is:

Front Top Edge

5 flowers

Back Top Edge

5 flowers

Front Side Edges

3 flowers on each side

Back Side Edges

3 flowers on each side

This uses:

22 flowers

Keep 2 flowers for handle decoration or replacement.

You can also use additional flowers across the lower corners if desired.


Flower Placement

Place flowers so neighboring petals slightly overlap.

The flowers should create a continuous decorative trim without completely hiding the white crochet body.

Use stitch markers or safety pins to hold everything in place.

Check both sides before sewing.


PART 12 — Sew the Flowers to the Bag

Thread the long flower tail onto a yarn needle.

Sew through:

  • flower center
  • base of several petals
  • strong stitches along the bag border

Avoid sewing only through the tips of the petals.

Each flower should remain slightly dimensional.

Secure each one in at least:

4–5 attachment points

Weave the yarn tail into the inside of the bag.

Repeat for all flowers.


PART 13 — Crochet the Handles

Make 2 identical handles using pink yarn.

Foundation

Chain 61.

Row 1

Sc in the second chain from the hook and across.

60 sc

Ch 1 and turn.

Rows 2–5

Sc in each stitch across.

Ch 1 and turn.

After Row 5, fasten off.

The strap should be approximately:

1¼ inches wide

and long enough to create a comfortable handbag handle.

Make the second strap exactly the same.


PART 14 — Reinforce the Handles

Crochet handles can stretch.

For a stronger bag, either:

  • sew cotton webbing to the underside
  • insert a length of non-stretch cord inside
  • add a fabric backing

Do this before attaching the decorative flowers.


PART 15 — Attach the Handles

Position one handle on the front.

Place each end approximately:

2½–3 inches from the nearest side edge

Allow approximately:

9–10 inches of handle drop

Pin both ends.

Sew each attachment area securely across the entire strap width.

Use several passes of yarn.

Repeat with the second handle on the back.

Check that both handles are:

  • the same height
  • centered
  • untwisted
  • equally spaced

PART 16 — Add Flowers to the Handles

For the decorated-handle version, make additional flowers as needed.

A good arrangement is:

4–5 flowers per handle

Space them along the outer side of each pink strap.

Sew each flower through its center and the base of several petals.

Do not completely cover the strap.

Leave enough visible pink crochet between flowers to keep the handle flexible.


PART 17 — Optional Flower-Only Handle Look

For a more heavily decorated version, make approximately:

8 flowers per handle

Overlap them slightly along the entire strap.

The pink strap beneath provides the actual strength.

The flowers should remain decorative only.

Do not build the handle solely from flower-to-flower joins if the bag will carry weight.


PART 18 — Optional Fabric Lining

A lining is strongly recommended because the white body contains open mesh.

Without a lining, small items may poke through the openings.

Cut the Lining

Measure:

  • finished bag width
  • finished height
  • side depth

Cut two fabric rectangles slightly larger than the front and back.

Add side and bottom pieces if using a structured lining, or make a simple boxed pouch.

Allow approximately:

½ inch seam allowance


Sew the Lining

Place lining pieces with right sides together.

Sew along:

  • side
  • bottom
  • opposite side

Create boxed bottom corners if desired.

Fold the upper raw edge inward.

Press carefully.


Insert the Lining

Place the lining inside the bag.

The folded fabric edge should sit approximately:

½ inch below the crochet opening

Hand sew it to the firm top crochet rounds.

Keep stitches small and hidden.

Do not sew through the flower petals.


Optional Magnetic Snap

Install a magnetic snap in the lining before attaching it to the crochet bag.

Place the closure at the center of the top opening.

Reinforce the fabric behind the snap with a small square of interfacing.


Optional Firm Base

Cut a rectangle of plastic canvas slightly smaller than the bottom of the bag.

Slide it between the crochet bottom and lining.

This helps the tote hold its rectangular shape.

Do not make the insert so large that it pushes against the side seams.


How to Make the Bag Wider

The white mesh panel can be resized easily.

The foundation needs to preserve the repeating mesh structure.

Add chains in multiples of:

3

Every additional 3 chains creates another mesh section.

Make both panels identical.

Adjust the gusset length to match the new dimensions.


How to Make the Bag Taller

Simply work additional mesh rows before adding the single crochet border.

For example:

  • 18 rows = medium handbag
  • 22 rows = taller tote
  • 26 rows = larger project bag

Measure the fabric rather than relying only on row count.


How to Make a Larger Tote

For a larger shoulder bag:

  • widen the panels
  • add more mesh rows
  • make the gusset 4–5 inches wide
  • lengthen the handles
  • reinforce the handles
  • add a strong fabric lining

The flower motifs can remain the same size.

Use additional flowers to fill the longer edges.


Color Ideas

Romantic

White + bright pink

Soft Vintage

Cream + dusty rose

Spring

White + lavender

Summer

Cream + coral

Botanical

Natural white + sage green flowers

High Contrast

Black body + cream flowers

Multicolor Garden

White body with flowers in:

  • pink
  • lavender
  • yellow
  • peach
  • pale blue

Keep the handles in one coordinating color so the bag does not become visually too busy.


Best Yarn for This Bag

Cotton is particularly useful because the motifs and mesh remain well defined.

A firm cotton or cotton blend helps:

  • maintain the rectangular shape
  • keep flowers crisp
  • reduce excessive stretching
  • make seams easier to reinforce

Very fuzzy yarn can hide the flower details and mesh openings.


Tips for Consistent Flowers

Use the Same Hook

Even a small hook-size difference can make flower motifs noticeably different.

Count the Petals

Every flower must have exactly:

5 ch-3 spaces

and therefore:

5 petals

Keep Petal Tension Even

Each petal uses:

sc, hdc, 3 dc, hdc, sc

Maintain consistent tension so all petals are the same size.

Make Flowers in Batches

Crochet all centers first.

Then work all petal setup rounds.

Then finish all petals.

This can make producing 20+ flowers much faster.


Common Problems

Flowers Curl

The petal stitches may be too tight.

Use slightly looser tension or lightly block the finished flowers.

Flower Has Six Petals

Check Round 2 carefully.

You need exactly:

5 ch-3 spaces

Bag Body Stretches

Add a fabric lining and reinforce the handles.

Cotton yarn also helps reduce stretch.

Mesh Panels Are Different Sizes

Count both rows and mesh blocks.

Block both panels before assembly.

Gusset Is Too Long

Do not force excess fabric into the corners.

Remove rows until it fits the two sides and bottom exactly.

Flowers Sag Away From the Bag

Add more attachment points around the base of the petals.

Do not attach flowers only through their centers.

Handles Stretch Too Much

Add cotton webbing or another non-stretch reinforcement.


Finishing

Before using the bag:

  • weave in all yarn tails
  • check every flower
  • reinforce loose petals
  • inspect both handle attachments
  • shape the bag
  • insert lining if using one
  • block gently if necessary

When blocking, avoid flattening the flowers completely.

The petals should retain some dimensional shape.

Pink Flower Crochet Tote

This bag gets its visual impact from combining two very simple crochet elements: an open white mesh panel and small five-petal flower appliqués.

The white lattice keeps the bag light and airy, while the repeated pink flowers create a bold decorative frame around the structure and handles.

Because the flowers are made separately, the same base pattern can be customized in many ways—from a lightly decorated everyday tote with just a few blossoms to a heavily embellished floral bag covered with dimensional crochet flowers.

Related posts

Determined woman throws darts at target for concept of business success and achieving set goals

Leave a Comment