Pocket Star Buddy & Flying Saucer Amigurumi Crochet Pattern

Introduction

A tiny alien with a little flying saucer is such a fun crochet project because it feels playful, soft, and easy to love. This design is made as a cute pocket-sized amigurumi set: a small space buddy that can sit inside a plush UFO, peek out from the top, or be displayed beside it.

Since the original full pattern is not available, this is a new original pattern created from the same general idea: a small alien friend and a matching saucer. The colors, shaping, and construction are changed to make it unique while still keeping that adorable “little alien in a UFO” feeling.

This beginner-friendly amigurumi pattern uses simple rounds, small pieces, soft plush yarn, and clear assembly. It makes a cute gift, desk buddy, nursery shelf decoration, market item, or kawaii crochet toy.

Description

The Pocket Star Buddy is a tiny plush alien with a rounded head, small body, little arms, tiny feet, and two short antennae. Instead of using the same bright mint color as the reference, this version uses a soft lavender-blue alien body with black embroidered or safety-style eyes and a tiny stitched smile.

The flying saucer is worked as two shallow bowl shapes that are joined together, with a soft ivory rim and a dusty blue accent band. The top has a round opening so the alien can sit inside. The saucer has three tiny landing feet underneath so it can stand on its own.

The finished set is small, squishy, and cute, with a cozy plush texture. It is simple enough for confident beginners and fun enough for anyone who loves space-themed amigurumi.

Materials

• Super bulky chenille yarn in soft lavender-blue for the alien
• Super bulky chenille yarn in warm light gray for the UFO body
• Super bulky chenille yarn in ivory for the top rim
• Super bulky chenille yarn in dusty blue for the UFO accent band and landing feet
• Small amount of black yarn or embroidery thread for the eyes and mouth
• Optional: 10–12 mm safety eyes
• 6 mm crochet hook
• Yarn needle
• Stitch marker
• Scissors
• Polyester fiberfill

Finished Size

Approximate finished size using super bulky chenille yarn:

• Alien height: about 4.5 inches
• UFO width: about 5.5–6 inches
• UFO height: about 3 inches

Finished size may vary depending on yarn thickness, hook size, and stuffing.

Gauge

Gauge is not critical for this plush, but stitches should be tight enough to hold stuffing.

If stuffing shows through, use a smaller hook.

Abbreviations

• MR: magic ring
• ch: chain
• sc: single crochet
• inc: increase, 2 sc in the same stitch
• dec: invisible decrease
• sl st: slip stitch
• BLO: back loop only
• FLO: front loop only
• st: stitch
• sts: stitches
• FO: fasten off

Pattern Notes

Work in continuous rounds unless the pattern says otherwise.

Use a stitch marker to mark the first stitch of each round.

Stuff pieces gradually as you work.

The alien and UFO are made separately.

The alien can be sewn into the UFO permanently or left removable.

For children under 3, embroider the eyes instead of using safety eyes.

Step-by-Step Instructions

Alien Head and Body

Use soft lavender-blue yarn and a 6 mm hook.

Round 1

Make a MR and work 6 sc into the ring. (6)

Round 2

Inc in each st around. (12)

Round 3

Repeat around: sc in next st, inc in next st. (18)

Round 4

Repeat around: sc in next 2 sts, inc in next st. (24)

Rounds 5–8

Sc in each st around. (24)

If using safety eyes, place them between Rounds 6 and 7, about 5 stitches apart.

Round 9

Repeat around: sc in next 2 sts, dec. (18)

Begin stuffing the head.

Round 10

Repeat around: sc in next st, dec. (12)

Round 11

Sc in each st around. (12)

This begins the small neck/body section.

Round 12

Repeat around: sc in next st, inc in next st. (18)

Rounds 13–16

Sc in each st around. (18)

Stuff the body lightly.

Round 17

Repeat around: sc in next st, dec. (12)

Round 18

Dec around. (6)

FO and close the opening.

Antennae

Make 2 using soft lavender-blue yarn.

Round 1

Make a MR and work 5 sc into the ring. (5)

Rounds 2–4

Sc in each st around. (5)

FO, leaving a long tail for sewing.

Do not stuff. Roll gently between your fingers to shape.

Arms

Make 2 using soft lavender-blue yarn.

Round 1

Make a MR and work 6 sc into the ring. (6)

Rounds 2–4

Sc in each st around. (6)

Flatten the opening.

FO, leaving a long tail for sewing.

Do not stuff.

Feet

Make 2 using soft lavender-blue yarn.

Round 1

Make a MR and work 6 sc into the ring. (6)

Round 2

Sc in each st around. (6)

FO, leaving a long tail for sewing.

Do not stuff.

Alien Face

If you did not use safety eyes, embroider two small black oval eyes between Rounds 6 and 7.

Use black embroidery yarn to stitch a tiny curved smile below the eyes.

Keep the face simple and soft.

Alien Assembly

Sew the two antennae to the top of the head, spaced evenly.

Sew the arms to the sides of the body around Rounds 12–14.

Sew the feet to the lower front of the body.

Weave in all ends securely.

UFO Top Bowl

Use warm light gray yarn and a 6 mm hook.

Round 1

Make a MR and work 6 sc into the ring. (6)

Round 2

Inc in each st around. (12)

Round 3

Repeat around: sc in next st, inc in next st. (18)

Round 4

Repeat around: sc in next 2 sts, inc in next st. (24)

Round 5

Repeat around: sc in next 3 sts, inc in next st. (30)

Round 6

Sc in each st around. (30)

Round 7

Working in BLO, sc in each st around. (30)

Round 8

Sc in each st around. (30)

FO, leaving a long tail for sewing.

This creates a shallow top bowl with a raised side.

UFO Bottom Bowl

Use warm light gray yarn.

Round 1

Make a MR and work 6 sc into the ring. (6)

Round 2

Inc in each st around. (12)

Round 3

Repeat around: sc in next st, inc in next st. (18)

Round 4

Repeat around: sc in next 2 sts, inc in next st. (24)

Round 5

Repeat around: sc in next 3 sts, inc in next st. (30)

Round 6

Sc in each st around. (30)

FO and weave in the end.

This piece should look like a shallow bottom dome.

UFO Accent Band

Use dusty blue yarn.

Join dusty blue yarn to the front loop left from Round 7 of the UFO top bowl.

Round 1

Sl st loosely in each front loop around. (30)

FO and weave in the end.

This creates a raised colored stripe around the saucer.

Top Opening Rim

Use ivory yarn.

Join ivory yarn to the top edge of the UFO top bowl.

Round 1

Ch 1.

Sc evenly around the top opening edge. (30)

Join with sl st.

Round 2

Ch 1.

Sc in each st around. (30)

Join with sl st.

FO and weave in the end.

This makes a soft rim for the alien to sit inside.

Joining the UFO

Place the UFO top bowl over the UFO bottom bowl with wrong sides facing each other.

The edges should line up with 30 stitches around.

Join warm light gray yarn through both layers at the edge.

Joining Round

Sc through both layers around, stuffing lightly before closing the final few stitches. (30)

Join with sl st.

FO and weave in the end.

Do not overstuff. The saucer should stay slightly flattened and round.

Landing Feet

Make 3 using dusty blue yarn.

Round 1

Make a MR and work 6 sc into the ring. (6)

Round 2

Sc in each st around. (6)

FO, leaving a long tail for sewing.

Sew the three landing feet evenly underneath the UFO.

Place one foot at the front center and two toward the back sides so the saucer can stand.

Final Assembly

Place the alien inside the UFO opening.

If you want the alien to be removable, leave it loose.

If you want it attached, sew the lower body lightly to the inside rim of the UFO.

Check that the UFO stands evenly on its landing feet.

Shape the saucer with your hands so the top and bottom bowls look smooth.

Weave in any remaining ends.

Tips & Variations

Use soft lavender-blue for a unique alien look instead of the common mint green.

Try peach, lilac, or pale yellow for a sweeter pastel space buddy.

Use warm gray, ivory, and dusty blue for a soft nursery-friendly UFO.

For a bolder space toy, use silver gray with navy or purple accents.

For a child-safe version, embroider the eyes and sew the alien permanently into the UFO.

For a removable play version, make the alien and UFO separately so the alien can pop in and out.

Do not overstuff the UFO, or it may become too round and lose its flying saucer shape.

Use a smaller hook if your chenille stitches are loose.

FAQ

Is this alien and UFO pattern beginner-friendly?

Yes. The pattern uses simple amigurumi shapes, single crochet rounds, increases, decreases, and basic sewing.

Can the alien come out of the UFO?

Yes. You can leave the alien removable, or sew it into the UFO if you want a fixed plush toy.

What yarn works best?

Super bulky chenille yarn gives the softest plush result. Worsted weight yarn can also be used for a smaller version.

Can I use safety eyes?

You can use safety eyes for display items or older children, but embroidered eyes are better for young children.

How do I keep the UFO shape flat?

Stuff it lightly and evenly. Too much stuffing will make it look like a ball instead of a saucer.

Conclusion

The Pocket Star Buddy & Flying Saucer is a cute original amigurumi set with a tiny alien friend and a soft plush UFO. It keeps the charm of a pocket alien toy while using a fresh color palette and a simple buildable construction.

Make it as a fun handmade gift, a desk plush, a nursery shelf decoration, or a playful crochet toy for space lovers. The little alien can sit inside the saucer or stand beside it, making this project extra sweet and full of personality.