Sandy Shell Bra-Cup Crochet Top

Sand beige crochet bra cup top with shell edging, shoulder straps, and tie-back band

The Sandy Shell Bra-Cup Crochet Top is a one-color tie-back summer top made from two shaped ribbed cups, a scalloped cup edge, a decorative shell underbust band, slim shoulder straps, and two adjustable back ties. This corrected Yarnimals version is locked to one adult medium size and gives exact cup counts, exact shell-band math, exact cup-placement stitches, and fixed strap attachment points.

The cups are worked separately around a short foundation chain. A centered 3-hdc increase creates the cup shape, while back-loop half double crochet produces the radiating ribs. Each completed cup receives a 31-stitch lower stabilizing edge for attachment and a controlled 33-stitch upper edging that supports exactly eight small shells.

Finished Size and Project Specification

  • Size: one adult medium
  • Cup width at lower edge: approximately 7.25 inches / 18.5 cm
  • Cup height: approximately 7.5 inches / 19 cm
  • Final shaped cup row: 55 hdc
  • Stabilized cup base: 31 sc
  • Shells around each cup upper edge: 8
  • Underbust band: 127 sc wide before back ties, approximately 31 inches / 79 cm
  • Underbust shells: exactly 21
  • Center gap between cup bases: 3 band stitches, approximately 0.75 inch / 2 cm
  • Shoulder straps: approximately 18 inches / 46 cm each
  • Back ties: approximately 22 inches / 56 cm each
  • Yarn: #3 DK-weight smooth cotton
  • Hook: 3.5 mm E-4
  • Color: warm sand beige

Materials

  • Approximately 550-650 yd / 500-595 m #3 DK cotton in warm sand beige
  • 3.5 mm crochet hook
  • Tapestry needle
  • Locking stitch markers
  • Scissors
  • Flexible measuring tape

Skill Level

Intermediate beginner. You should be comfortable working into both sides of a foundation chain, identifying a marked center stitch, crocheting through the back loop only, making shell stitches, and sewing finished crochet pieces together accurately.

Abbreviations

  • ch = chain
  • sc = single crochet
  • hdc = half double crochet
  • dc = double crochet
  • sl st = slip stitch
  • st(s) = stitch(es)
  • BLO = back loop only
  • RS = right side

Gauge

Approximately 18 hdc and 13 rows = 4 inches / 10 cm in BLO hdc after gentle blocking. Cup measurements are the final authority: the completed medium cup should be close to 7.25 inches across its stabilized lower edge and 7.5 inches from base to apex.

Centered Cup Increase

The first cup row creates a 5-hdc turning group at the apex. Mark the center stitch of that five-stitch group.

On every later row, work in BLO until you reach the stitch immediately before the marker. Work the next stitch normally, then work 3 hdc in BLO of the marked apex stitch. The center stitch of this new three-stitch group becomes the marked apex for the next row. Continue across the remaining stitches.

Each increase row therefore adds exactly 2 stitches. The count progresses:

  • Row 1: 37
  • Row 2: 39
  • Row 3: 41
  • Row 4: 43
  • Row 5: 45
  • Row 6: 47
  • Row 7: 49
  • Row 8: 51
  • Row 9: 53
  • Row 10: 55

Shell Stitch

A shell is 5 dc worked into the same stitch. In the edging pattern, shells are separated by skipped stitches and anchored with sc. The five dc remain separate stitches; do not close them together as a puff or bobble.

Construction Overview

Make two identical 10-row cups. Stabilize each lower edge with exactly 31 sc. Add a 33-sc foundation around the two upper slopes and work exactly eight shells around that foundation. Crochet one 127-stitch underbust band containing exactly 21 shells. Position the left cup over band stitches 32-62 and the right cup over stitches 66-96, leaving stitches 63-65 free between them. Sew the 31 cup-base stitches one-for-one to those band stitches. Add two fixed shoulder straps and two long back ties.

Step-by-step crochet collage for the Sandy Shell bra-cup crochet top

Detailed Pattern

Shaped Cup — Make 2

Ch 18.

Row 1: Hdc in 2nd ch from hook and in each of the next 15 chains. You have 16 hdc along the first side and one unused final foundation chain. Work 5 hdc in the final chain. Place a marker in the center, third hdc of that five-stitch group. Rotate the foundation chain and work 1 hdc into each of the 16 unused loops down the opposite side. Turn. 37 hdc.

Row 2: Ch 1; this does not count as a stitch. Hdc in BLO of each stitch up to the marked apex. Work 3 hdc in BLO of the marked stitch. Move the marker to the center stitch of those 3 new hdc. Hdc in BLO of every remaining stitch. Turn. 39 hdc.

Rows 3-10: Repeat Row 2, always increasing only in the marked apex stitch and moving the marker to the new center stitch. Counts are 41, 43, 45, 47, 49, 51, 53, and finally 55 hdc on Row 10.

Fasten off after Row 10. Lay the cup flat without stretching it. The two lower row-end corners should sit level and the apex should remain centered.

Stabilize the Lower Cup Edge — 31 sc

Turn the cup so the open lower edge between the two Row 10 ends faces you. Join sand yarn at the first lower corner.

Work 31 sc evenly across the entire lower edge from one lower corner to the other. Distribute the stitches across the row-end structure and the base of the foundation chain so the edge is straight rather than gathered. Fasten off.

Measure this stabilized edge. It should be approximately 7.25 inches. If 31 sc makes the base visibly ruffle or pull inward, your cup gauge differs from the stated gauge and should be corrected before making the second cup.

Upper Cup Edging Foundation — 33 sc

With the cup RS facing, join yarn at the first lower corner beside the stabilized base.

Work 15 sc evenly up the first sloping edge. At the apex work 3 sc into the apex position. Work 15 sc evenly down the second sloping edge. Do not work across the 31-sc lower edge. Turn. 33 sc.

Upper Cup Shell Row — 8 shells

Ch 1, sc in the first stitch. *Skip 1 stitch, work 5 dc in the next stitch, skip 1 stitch, sc in the next stitch.* Repeat from * to * 8 times total. Fasten off. The full 33-stitch edging is consumed exactly: 1 starting sc plus eight 4-stitch shell repeats.

Repeat the complete cup instructions for the second cup and verify both pieces match in height, base width, 31-sc base count, and eight-shell upper edging.

Underbust Band

Ch 128.

Band Row 1: Sc in 2nd ch from hook and in each chain across. Turn. 127 sc.

Band Row 2: Ch 1, sc in first stitch. *Skip the next 2 stitches, work 5 dc in the next stitch, skip the next 2 stitches, sc in the next stitch.* Repeat from * to * 21 times. Turn.

This row consumes all 127 Row 1 stitches exactly: 1 starting stitch plus 21 repeats using 6 base stitches each. Row 2 contains 21 five-dc shells and 22 sc anchor stitches = 127 stitches total.

Band Row 3: Ch 1. Sc in every stitch across, working one sc into each of the 105 dc stitches and each of the 22 sc anchor stitches. Turn. 127 sc. Fasten off.

Block the band lightly to approximately 31 inches without stretching the shell shapes flat.

Exact Cup Placement on the Band

Lay Band Row 3 facing upward and number its 127 stitches from left to right.

  • Left outer margin: stitches 1-31
  • Left cup attachment: stitches 32-62
  • Center gap: stitches 63-65
  • Right cup attachment: stitches 66-96
  • Right outer margin: stitches 97-127

Place the 31-sc base of the left cup directly over band stitches 32-62. Place the 31-sc base of the right cup over band stitches 66-96. The cups must mirror each other and the 3 free band stitches 63-65 remain visible between them.

Sew the Cups to the Band

Using a tapestry needle and matching sand yarn, sew the left cup base to the band one cup-base stitch to one band stitch for all 31 positions. Use a small whipstitch or mattress-style seam that catches both loops of the cup base and the corresponding band stitch.

Repeat for the right cup over stitches 66-96. Do not pull the seam tighter than the band. When finished, both cups should sit at equal height with the center gap unchanged.

Shoulder Straps — Make 2

Join yarn securely at the apex of the first cup, immediately behind the center shell area.

Ch 76. Sl st in 2nd ch from hook and in every remaining chain. 75 sl sts. Fasten off, leaving an 8-inch sewing tail. The strap should measure approximately 18 inches.

Repeat at the second cup apex.

Back Strap Attachment Points

On the left outer band margin, count 17 stitches inward from the left band end and place a marker. On the right outer margin, count 17 stitches inward from the right band end and place a marker.

Lay the top flat and make sure neither shoulder strap is twisted. Sew the free end of the left strap securely around the left marker position and the right strap around the right marker position. Reinforce each attachment with several passes through neighboring band stitches, keeping the attachment no wider than approximately 0.75 inch.

Back Ties — Make 2

Join yarn at the extreme left end of the underbust band. Ch 96. Sl st in 2nd ch from hook and in every remaining chain. 95 sl sts. Fasten off. The finished cord should be approximately 22 inches.

Repeat at the extreme right band end.

The two ties meet at center back in a bow. Do not add beads, toggles, or metal hardware to the cord ends.

Final Measurement Check

  • Each cup Row 10: 55 hdc
  • Each stabilized cup base: 31 sc
  • Each cup upper edging foundation: 33 sc
  • Each cup shell edging: 8 shells
  • Underbust Band Row 1: 127 sc
  • Underbust Band Row 2: 21 shells + 22 sc anchors
  • Underbust Band Row 3: 127 sc
  • Center gap: 3 band stitches
  • Shoulder strap: ch 76, then 75 sl sts
  • Back tie: ch 96, then 95 sl sts

Visual Checkpoints

After Cup Row 1: the 5-hdc turning group sits at the exact apex and the marker is in its center stitch.

After Cup Row 5: the BLO ridges should radiate symmetrically from the lower corners toward the marked apex.

After Cup Row 10: count 55 stitches before fastening off.

After the 31-sc base: the lower edge should be straight and ready to sew one-for-one to the band.

After the 33-sc upper foundation: the upper contour should lie flat before the shells are added.

After cup attachment: three unused band stitches remain visible between the cups and the two 31-stitch outer margins remain equal.

Troubleshooting

The cup leans to one side

The centered increase moved. Every increase must be worked into the marked apex stitch, and the marker must be moved to the center of the three new hdc immediately after the increase.

The final cup count is not 55

Row 1 has 37 stitches and Rows 2-10 each add exactly two. Recount from the most recent correct row instead of compensating with an extra stitch at the edge.

The shell edging ruffles

Confirm the foundation has exactly 33 sc and the shell row contains exactly eight repeats. Extra foundation stitches or extra shells create fullness.

The underbust shell row does not end cleanly

Band Row 1 must contain 127 sc. Start Row 2 with one sc, then work exactly 21 repeats of skip 2, 5 dc, skip 2, sc.

The cups are off-center

Use the numbered band placement rather than estimating visually. Left cup = stitches 32-62, center gap = 63-65, right cup = 66-96.

The shoulder straps twist

Lay the top flat before sewing the free strap ends to the band and follow each strap continuously from apex to back attachment.

Finishing

Weave in every tail securely, paying special attention to the cup-base seams, shoulder-strap attachments, and back-tie joins. Wet block according to the cotton yarn label. Shape the cups over a rolled towel so the centered shaping is preserved rather than flattened. Lay the band and straps straight and allow the entire top to dry fully.

Pattern at a Glance

  • Make two cups from ch 18.
  • Row 1 = 37 hdc; increase 2 stitches per row through Row 10 = 55 hdc.
  • Add 31 sc across each cup base.
  • Add 33 sc around the upper contour and exactly 8 shells.
  • Underbust band: ch 128; 127 sc.
  • Band shell row: exactly 21 shells.
  • Attach cups to band stitches 32-62 and 66-96.
  • Leave band stitches 63-65 free as the center gap.
  • Make two ch-76 slip-stitched shoulder straps.
  • Attach strap backs 17 stitches inward from each band end.
  • Make two ch-96 slip-stitched back ties.

This corrected version gives every shaped and assembled section a fixed count: the cup increases total correctly, the shell rows consume their foundations exactly, and the two 31-stitch cup bases align to exact positions on the 127-stitch underbust band.